How to clean roots blower correctly Roots blower is a volume rotary blower, the biggest characteristic is that when the pressure is adjusted within the allowable range, the flow rate is almost unchanged, the pressure selection range is wide, and it has the characteristics of providing forced gas. The medium should be free of oil. Simple structure, easy maintenance, long service life and small vibration.Roots blower is a kind of positive displacement blower, which can be used as vacuum auxiliary for suction. The two rotors rotate in the opposite direction to compress or remove gas. Both rotors are fixed on the synchronous gear set, so there is a small gap between the cylinder and the rotor during rotation, and they can not be contacted with each other.When cleaning roots blower, we should pay attention to three requirements. The best way to prevent faults in Roots blower cleaning is to take correct cleaning method and clean the equipment regularly. Every day to do a good job of Roots blower maintenance work, reduce roots blower failure.Care must be taken in cleaning roots blower motors. Be careful not to let oil drop into the motor. About the cleaning of the motor, clean it with a dry cleaning brush. Clean the outside and inside of the equipment with dry cloth. Keep the equipment dry enough to avoid moisture. The interior of Roots blower can not be wiped with wet cloth. If the water drops on the equipment, it will affect the use. Therefore, it is best to wipe the interior of the device with a clean cotton cloth. After cleaning roots blower equipment, wipe the external and internal parts of the equipment with dry rag to fully keep the equipment dry and prevent the equipment from expired.Industrial craneRoots BlowersRoots Vacuum Pump
top of page
bottom of page